Federal Contract

Construction Airfield Blast Shield

See 1,000 open contracts in Texas →

See the original posting, the buyer’s contact details, and thousands more contracts like this one

Free account. Already have one? Log in

Get started

Agency

DEPT OF THE AIR FORCE

NAICS Code

238120

Set-Aside

SBA

Department

DEPT OF DEFENSE

Solicitation Type

Presolicitation

Solicitation #

FA466126R0008

PSC Code

Y1BZ

Division

FA4661 7 CONS CD

Performance State

TX

Posted

Tue, August 18, 2026

Response Deadline

Wed, September 2, 2026

Extended to Oct 27, 2026 by a later notice

Description

1. Action Code: This is a Pre-Solicitation notice. 2. Date: 18 August 2026 3. PSC Code: Y1BZ - Construction of other Airfield Structures 4. Subject Title: Construction of Apron Blast Shield, Dyess AFB, TX 5. Solicitation Number: FA466126R0008 6. Important: This notice does not constitute a request for proposal, request for quote, or invitation for bid. The intent of this notice is to provide the pre-solicitation notice required by Revolutionary FAR Overhaul (RFO) 5.101, Presolicitation Notice in preparation for release of the Request for Proposal (RFP) on a later date. 7. Description: The RFP for this project is expected to be issued on or about middle of September 2026. The Proposal due date is planned on or about, end of October 2026. The North American Industry Code Standard (NAICS) is NAICS 238120 Structural Steel and Precast Concrete Contractors, and the size standard is $19M. The planned procurement method is contracting by Lowest Price Technically Acceptable (LPTA). The resulting contract is planned to be a firm-fixed price (FFP) contract for the work described in the Statement of Work which is attached and will be provided with the solicitation. Dyess AFB is seeking the construction of blast deflector fenses for the B1-Bomber. Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences. All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL�s), and all applicable Federal, State and local regulations/codes. The blast fence shall be capable of withstanding the afterburner throttle at 30,000 lbs thrust of a B1-B Bomber engine nozzle 90 ft/ (min.) from front of deflector foundation. Extrapolated temperature is approx. 1400 ? velocity @ 900 MPH. 8. P…

Notice history (5)

  1. Aug 7, 2026Sources SoughtDue Aug 14, 2026

    Amendment 1: Response date changed from August 7, 2026 to August 14, 2026 Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences for the B1-B. All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL�s), and all applicable Federal, State and local regulations/codes. The blast deflector shall be of the curved, non-perforated, galvanized, corrugated type, with corrugations running in a horizontal direction. The Lynnco Type GS-20-2 as manufactured by Blast Deflectors, Inc shall beconsidered as the standard for this work. At the option of the Contracting Officer, alternate types of blast deflectorsmay be considered provided the drawings and specifications of alternate types are approved by Contracting Officer.The blast fence shall be furnished and installed by a manufacturer/contractor with blast fence experience. The blastfence shall be capable of withstanding the afterburner throttle at 30,000 lbs thrust of a B1-B Bomber engine nozzle 90 ft/ (min.) from front of deflector foundation. Extrapolated temperature is approx. 1400 ? velocity @ 900 MPH. Haul Route: Approved haul route is from the Tye Gate, Third Street, Ave E, Second Street, to Flightline. Haul Route su

  1. Aug 18, 2026PresolicitationDue Sep 2, 2026Viewing
  2. Sep 18, 2026SolicitationDue Oct 15, 2026

    Airfield Blast Shield

    1.1 PROJECT DESCRIPTION: 1.1.1 Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences for the B1-B. All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL�s), and all applicable Federal, State and local regulations/codes. 2.1 GENERAL: 2.1.1 The blast deflector shall be of the curved, non-perforated, galvanized, corrugated type, with corrugations running in a horizontal direction. The Lynnco Type GS-20-2 as manufactured by Blast Deflectors, Inc shall be considered as the standard for this work. At the option of the Contracting Officer, alternate types of blast deflectors may be considered provided the drawings and specifications of alternate types are approved by Contracting Officer. The blast fence shall be furnished and installed by a manufacturer/contractor with blast fence experience. The blast fence shall be capable of withstanding the afterburner throttle at 30,000 lbs thrust of a B1-B Bomber engine nozzle 90 ft/ (min.) from front of deflector foundation. Extrapolated temperature is approx. 1400 ? velocity @ 900 MPH. 2.1.2 Haul Route: Approved haul route is from the Tye Gate, Third Street, Ave E, Second Street, to Flightline. Haul Route subject to chang

  3. Oct 13, 2026SolicitationDue Oct 27, 2026

    Airfield Blast Shield

    Amendment 0001 (13 Oct 2026): The purpose of this amendment is to � Extend the Proposal Due Date to 27 October 2026. � All other solicitation requirements remain unchanged and in full effect. 1.1 PROJECT DESCRIPTION: 1.1.1 Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences for the B1-B. All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL�s), and all applicable Federal, State and local regulations/codes. 2.1 GENERAL: 2.1.1 The blast deflector shall be of the curved, non-perforated, galvanized, corrugated type, with corrugations running in a horizontal direction. The Lynnco Type GS-20-2 as manufactured by Blast Deflectors, Inc shall be considered as the standard for this work. At the option of the Contracting Officer, alternate types of blast deflectors may be considered provided the drawings and specifications of alternate types are approved by Contracting Officer. The blast fence shall be furnished and installed by a manufacturer/contractor with blast fence experience. The blast fence shall be capable of withstanding the afterburner throttle at 30,000 lbs thrust of a B1-B Bomber engine nozzle 90 ft/ (min.) from front of deflector foundation. Extrapola

  4. Oct 16, 2026SolicitationDue Oct 27, 2026

    Airfield Blast Shield

    Amendment 0002 (16 Oct 2026) The purpose of this amendment is to: 1. Incorporate the attached Questions and Answers (Q&A) document providing Government responses to submitted solicitation questions. 2. All other solicitation requirements remain unchanged and in full effect. Amendment 0001 (13 Oct 2026): The purpose of this amendment is to 1. Extend the Proposal Due Date to 27 October 2026. 2. All other solicitation requirements remain unchanged and in full effect. 1.1 PROJECT DESCRIPTION: 1.1.1 Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences for the B1-B. All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL�s), and all applicable Federal, State and local regulations/codes. 2.1 GENERAL: 2.1.1 The blast deflector shall be of the curved, non-perforated, galvanized, corrugated type, with corrugations running in a horizontal direction. The Lynnco Type GS-20-2 as manufactured by Blast Deflectors, Inc shall be considered as the standard for this work. At the option of the Contracting Officer, alternate types of blast deflectors may be considered provided the drawings and specifications of alternate types are approved by Contracting Officer. The blast fence

Similar open contracts