Market Research / Sources Sought - Type IV Polymeric Piles
See the original posting, the buyer’s contact details, and thousands more contracts like this one
Free account. Already have one? Log in
Description
Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Pacific (NAVFAC Pacific) is conducting market research in accordance with FAR Part 10 to identify potential manufacturers capable of producing type IV polymeric piles that have equal performance and listing/approval requirements as the type IV polymeric piles that are manufactured by Tangent Technologies, LLC. Responses from third-party distributors, pass through resellers, or supply brokers who do not directly own the production line or manufacturing rights to a qualified equivalent product will not be considered responsive to this market survey. FY27 MCON Project P-676 Polaris Point Submarine Pier, located Naval Base Guam requires type IV polymeric piles that demonstrate the following salient characteristics: Performance Characteristics: Structural Outer Dimensions/Diameter: 16 inch, N/A, +/- 5 percent Allowable Moment Capacity *: 278 kip � feet, ASTM D7258 Flexural Modulus (EI): 2.7x109 lb-in2, ASTM D6109, +/- 10 percent Allowable Shear Capacity *: 45.0 kip, ASTM D7258 * A factor of safety of 2.0 is used to convert allowable to ultimate for flexure and 3.0 used to convert allowable to ultimate for shear. Physical Properties: Specific Gravity: ASTM D792, 63 pounds per cubic foot +/- 5 percent. Pile Skin Density: ASTM D792, 60 pounds per cubic foot +/- 5 percent. Pile Core Density: ASTM D792, 48 pounds per cubic foot +/- 5 percent. Water Absorption: ASTM D570, less than 0.1 percent at 24 hours. Brittleness: ASTM D746, no break. Hardness (Shore D): ASTM D2240, 60 +/- 10 percent. Ultraviolet Effect on Hardness: ASTM D4329, no change after 500 hours of exposure. Flame Spread Rating: ASTM E84, less than 200. Abrasion Resistance: ASTM D4060, less than 0.5g. If the pile material is reactive to seawater, alternative can be provided where the pile is furnished with an HDPE sleeve encasement or abrasion resistance polymer, with a minimum thickness of � inch. This is not a request…