Source Sought for Schneider Electric PowerLogic ION8650 Power and Energy
See the original posting, the buyer’s contact details, and thousands more contracts like this one
Free account. Already have one? Log in
Description
The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for an electrical meter that has equal performance requirements as the Schneider Electric PowerLogic ION8650 Power and Energy, manufactured by Schneider Electric USA, Inc., 800 Federal St, Andover, MA 01810-1067. The alternate product/service must meet the following requirements/specifications: Listed on AF�s Advanced Meter Reading System (AMRS) Compliant Meter List Meter must comply with ANSI C12.1, NEMA C12.19, and ANSI C12.20 and must match existing AMRS reading system at the installation. Meter must be rated for use at temperature from minus 40 degrees Centigrade to plus 70 degrees Centigrade. The meters must have an electronic demand recording register and must be secondary reading as indicated. The register must be used to indicate maximum kilowatt demand as well as cumulative or continuously cumulative demand. Demand must be measured on a block-interval basis and must be capable of a 5 to 60 minute interval and initially set to a 15-minute interval. It must have provisions to be programmed to calculate demand on a rolling interval basis. Meter readings must be true RMS. The meter electronic register must be of modular design with non-volatile data storage. Downloading meter stored data must be capable via an optical port. Recording capability of data storage with a minimum capability of 89 days of 15 minute, 2 channel interval data. The meter must be capable of providing at least 2 KYZ pulse outputs (dry contacts). Meter must have an optical port on front of meter. Optical device must be compatible with ANSI C12.18. Meters must be 120-480 volts auto ranging. Power Quality: sag/swell, individual, even, odd, total harmonics to the 31st and symmetrical compon…